想要縮短《Acta Metallurgica Sinica》雜志的審稿周期需要作者、編輯部和審稿人等多方面的共同努力，作者可以采取一些有效措施，間接地加快審稿進度，提升稿件的處理效率。

建議如下：

一、提高論文質量

（1）嚴格遵循投稿要求：在投稿前，仔細閱讀《Acta Metallurgica Sinica》雜志的投稿指南，包括格式要求、字?jǐn)?shù)限制、參考文獻格式等。確保稿件符合雜志的規范，避免因格式問題被退回修改，從而耽誤時間。

（2）提高論文質量：確保論文的研究內容具有創新性和學術價值，數據準確，論證嚴謹，語言表達清晰流暢。高質量的稿件更容易通過初審，進入同行評審階段。

二、選擇合適的投稿時機

（1）關注期刊審稿周期：在投稿前，了解《Acta Metallurgica Sinica》雜志的審稿周期（預計1-3個月）和發表周期（月刊），以便合理安排投稿時間。

（2）關注期刊動態：了解期刊的專題征稿或熱點話題，針對性地投稿，可能獲得優先處理。

三、與編輯部保持良好溝通

（1）主動了解審稿進度：如果超過預計的審稿時間仍未收到回復，可以禮貌地向編輯部發送郵件，詢問稿件的審稿進度。

（2）尊重審稿意見：認真對待審稿意見，積極修改論文中的不足之處，共同探討論文的改進方向。

需要注意的是，縮短審稿周期的前提是保證稿件的質量，不能為了追求速度而犧牲學術嚴謹性。

《Acta Metallurgica Sinica》雜志創刊于1988年，是由中國科學技術協會主管、中國金屬學會主辦的學術理論月刊。國內刊號CN：21-1361 / TG，國際刊號ISSN：1006-7191。該雜志以推動工業改革與發展、探索工業規律為宗旨，致力于為工業工作者、研究者和管理者提供一個學術交流的平臺。

《Acta Metallurgica Sinica》雜志投稿建議：

Manuscripts Structure

Please follow this order when typing manuscripts: Title, Authors (no more than eight authors), Authors' Addresses, Abstract (less than 200 words), Keywords (three to five separated by a comma), Main Text (divided into a few sections from Introduction to Conclusions), Acknowledgements, References, Appendix, Tables and Figure Captions. Physical quantities should be printed in italics, and vectors in bold-face italics. SI units should be used throughout. All publications cited in the text should be denoted by superscripts (e.g. “Brown et al.[1] have reported that……”).

References

The references should be typed in the following style:

?For journals: D.P. Walls and F.W. Zok, Acta Metall Mater 42(8) (1994) 2675.

?For conference proceedings: H. Yasuda, I. Ohnaka, K. Shimamura, T. Fukuda and K. Watanabe, In: S. Asai ed., The 3rd Int. Symp. on Electromagnetic Processing of Materials (ISIJ, Nagoya, Japan, 2000) p.647.

?For books: K.H. Kuo, H.Q. Ye and Y.K. Wu, Electron Diffraction Pattern (Science Press, Beijing, 1983) p.90 (in Chinese).

?For others: (Please provide as much detail as possible)

1. S.L. Brown and J.D. Sullivan, Dissolution of Various Copper Minerals, Report of US Bureau of Mines No.3228 (Washington, 1934).

2. S.C. Huang, US Patent US5324367 (6 April 1993).

3. L.H. Edelson, PhD Dissertation (University of California, Berkeley, 1993). 

Illustrations

(1) Photographs should be printed in high contrast and clarity. TIFF or JPEG files are the preferred format. The minimum acceptable resolution for photographs should be 600 dpi.

(2) Line drawings made with Origin or Word format generally give perfect results (much better than Excel), so authors should convert XLS files into OPJ files using ORIGIN software. TIFF files are also an acceptable format for line drawings (minimum resolutions are 300--600 dpi, after reduction the final lettering height should be no less than 2 mm). The lettering and plotted points should be legible after reduction (using Arial font, the sizes should be about 26 pt in Origin and 8 pt in Word or larger). Graphs should have axes with proper labels (according to “Quantity/Unit”, e.g., Temperature/K).

聲明：以上內容來源于互聯網公開資料，如有不準確之處，請聯系我們進行修改。